sharalei Posted March 30, 2015 Report Posted March 30, 2015 Good day sir . iam new and just getting started for now i just downloaded Fro but i cant play it coz the screen is so small i tried all ways i read in this forums im still finding some ways to find it here . please help me fix my tiny resolution . ASAP thanks .. using OS 8
Seraphine Posted March 30, 2015 Report Posted March 30, 2015 (edited) http://i.imgur.com/DpucJ5o.jpg Right click your fkro client go to properties then go to compatibility and check off the run as administrator box, change your resolution in the setup.exe and you should be good to go! Edited March 30, 2015 by Seraphine
Bishop Posted April 4, 2015 Report Posted April 4, 2015 First thing you should do is follow the steps at the troubleshooting guide: Go to your RO folder Open the setup application by double clicking it. At the top bar select your graphic card Select the resolution that you want (Always pick one lower or equal to your current resolution, not higher). Press OK. Right click your setup application and click run as administrator. Select the resolution that you want (Always pick one lower or equal to your current resolution, not higher). Press OK. Start the game by double clicking FkenRO.exe Your client should now work. Optional: On windows 8 make sure you disable full screen mode at the setup as full screen mode does not cooperate with windows 8 very well. If the above does not work, show me a screenshot of your setup.exe and we'll go from there.
iCrush213 Posted April 4, 2015 Report Posted April 4, 2015 First thing you should do is follow the steps at the troubleshooting guide: Go to your RO folder Open the setup application by double clicking it. At the top bar select your graphic card Select the resolution that you want (Always pick one lower or equal to your current resolution, not higher). Press OK. Right click your setup application and click run as administrator. Select the resolution that you want (Always pick one lower or equal to your current resolution, not higher). Press OK. Start the game by double clicking FkenRO.exe Your client should now work. Optional: On windows 8 make sure you disable full screen mode at the setup as full screen mode does not cooperate with windows 8 very well. If the above does not work, show me a screenshot of your setup.exe and we'll go from there. oh i gave up
iCrush213 Posted April 6, 2015 Report Posted April 6, 2015 redownload and reinstalled the file~ in used uTorrent method to redownload~ still same progress~ still small screen. >.<again, no setup.exe just opensetup.exe stil lgot the error~
Aerofox Posted April 6, 2015 Report Posted April 6, 2015 redownload and reinstalled the file~ in used uTorrent method to redownload~ still same progress~ still small screen. >.< again, no setup.exe just opensetup.exe stil lgot the error~ I went to download the all-in-one executable patcher ,and I've noticed something. Looks like for patch 4.7 and above, they've changed setup.exe to opensetup.exe Either way, their purpose is the same. Open opensetup.exe then change the Resolution to anything you want BUT 640x480x16. If you're still getting a tiny screen, reply to this post of mine. :)
iCrush213 Posted April 7, 2015 Report Posted April 7, 2015 I went to download the all-in-one executable patcher ,and I've noticed something. Looks like for patch 4.7 and above, they've changed setup.exe to opensetup.exe Either way, their purpose is the same. Open opensetup.exe then change the Resolution to anything you want BUT 640x480x16. If you're still getting a tiny screen, reply to this post of mine. :) I went to download the all-in-one executable patcher ,and I've noticed something. Looks like for patch 4.7 and above, they've changed setup.exe to opensetup.exe Either way, their purpose is the same. Open opensetup.exe then change the Resolution to anything you want BUT 640x480x16. If you're still getting a tiny screen, reply to this post of mine. :) yep, still tiny window~ I also tried the editing tool for OptionInfo.lua to maximize the screen still nothing happens and also I tried using the regedit, nothing happens. >.<
Aerofox Posted April 7, 2015 Report Posted April 7, 2015 yep, still tiny window~ I also tried the editing tool for OptionInfo.lua to maximize the screen still nothing happens and also I tried using the regedit, nothing happens. >.< Can you send me a screenshot of the Graphics tab of your opensetup.exe file?
Bishop Posted April 7, 2015 Report Posted April 7, 2015 (edited) Replacing the opensetup.exe for setup.exe should fix your issue. Depending on your computer setup the client will either listen to the opensetup.exe or the regular one (in certain modes). Link to regular setup.exe (Please make a backup of your current setup first before replacing it): http://www.filedropper.com/setup_13 With the above setup, follow the steps I posted earlier and update me if it works or not. Edited April 7, 2015 by Bishop
iCrush213 Posted April 8, 2015 Report Posted April 8, 2015 Can you send me a screenshot of the Graphics tab of your opensetup.exe file? Replacing the opensetup.exe for setup.exe should fix your issue. Depending on your computer setup the client will either listen to the opensetup.exe or the regular one (in certain modes). Link to regular setup.exe (Please make a backup of your current setup first before replacing it): http://www.filedropper.com/setup_13 With the above setup, follow the steps I posted earlier and update me if it works or not. The download seems have a problem, can't download got errors.
bjwagayen Posted April 8, 2015 Report Posted April 8, 2015 run it in administrative its just an easy problem bro mine sucks i cant log in to server
winterlightangel Posted April 8, 2015 Report Posted April 8, 2015 Hi! I'm new to FRO and I am experiencing the same problems. I also did as advised from three separate posts and the results are still the same. My screen shots are the same as that of iCrush213. Help please?
Bishop Posted April 8, 2015 Report Posted April 8, 2015 (edited) If you are sure you tried running opensetup.exe in both administrator mode and compatilibity mode then proceed to the download or upload your opensetup.log so I can take a look at that one. Our client might be having some trouble with the sanity checks opensetup does. Since you have trouble with the other upload I'll upload it to another site. Try this one: http://www.megafileupload.com/1Kep/Setup.exe run it in administrative, its just an easy problem bro mine sucks i cant log in to server This shouldn't be the problem as the guide already states to run it as administrator so I'm assuming he already did that. As for your own issue, you should make a ticket and supply us your username and IP adres. If you still can't log in right now we'll have to rule out that your IP isn't banned from our side. When it's not then it's probably your ISP. Edited April 8, 2015 by Bishop
winterlightangel Posted April 9, 2015 Report Posted April 9, 2015 Here is my setup log entries (I just copy-pasted it as it is): == RO OpenSetup Log ============================================================[2015-04-07 21:54:35.053][info] Logging started.[2015-04-07 21:54:35.053] [info] Version: 2.11.5.396 (built: 5509c1a4, linker: 6.0, subsystem: 4.0, checksum: 0007266f)[2015-04-07 21:54:35.053] [info] Operating System: Windows 8.1 Single Language (6.3.9600, Windows NT platform, 32-bit)[2015-04-07 21:54:35.053] [info] Memory Utilization: 54%[2015-04-07 21:54:35.053] [info] Integrity Level: Medium[2015-04-07 21:54:35.053] [info] Command Line: "C:\Users\Winter Light Angel\Downloads\ForsakenRO All-In-One v4.7\opensetup.exe"[2015-04-07 21:54:35.054] [Warning] Either there is no config file or it failed to open.[2015-04-07 21:54:35.360][info] Enumerated 2 DX7 drivers.[2015-04-07 21:54:35.360] [info] Driver 'Primary Display Driver': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-07 21:54:35.360] [info] HW Device 'Direct3D HAL': Type 1[2015-04-07 21:54:35.360] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-07 21:54:35.360] [info] SW Device 'RGB Emulation': Type 0[2015-04-07 21:54:35.360] [info] Driver 'Intel® HD Graphics Family': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-07 21:54:35.360] [info] HW Device 'Direct3D HAL': Type 1[2015-04-07 21:54:35.360] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-07 21:54:35.360] [info] SW Device 'RGB Emulation': Type 0[2015-04-07 21:54:35.457][info] OnChangeSettingsEngine: LUA[2015-04-07 21:54:58.372][info] LUA settings engine sanity check started.[2015-04-07 21:54:58.372] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-07 21:54:58.373] [info] Checking for 'System\OptionInfo.lub'...[2015-04-07 21:54:58.373] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-07 21:54:58.373] [info] Settings directory does not exist, skipping settings file tests.[2015-04-07 21:54:58.373] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-07 21:54:58.373][info] LUA settings engine sanity check stopped.[2015-04-07 21:54:58.373][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000003, 3):The system cannot find the path specified.[2015-04-07 21:55:10.239][info] OnChangeSettingsEngine: LUA[2015-04-07 21:55:13.561][info] LUA settings engine sanity check started.[2015-04-07 21:55:13.561] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-07 21:55:13.561] [info] Checking for 'System\OptionInfo.lub'...[2015-04-07 21:55:13.561] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-07 21:55:13.562] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-07 21:55:13.562] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-07 21:55:13.562] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-07 21:55:13.562][info] LUA settings engine sanity check stopped.[2015-04-07 21:55:13.562][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-07 21:55:19.596][info] OnChangeSettingsEngine: LUA[2015-04-07 21:55:20.081][info] LUA settings engine sanity check started.[2015-04-07 21:55:20.081] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-07 21:55:20.081] [info] Checking for 'System\OptionInfo.lub'...[2015-04-07 21:55:20.081] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-07 21:55:20.082] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-07 21:55:20.082] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-07 21:55:20.082] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-07 21:55:20.082][info] LUA settings engine sanity check stopped.[2015-04-07 21:55:20.082][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-07 21:55:23.681][info] Logging stopped.================================================================================== RO OpenSetup Log ============================================================[2015-04-07 22:05:42.583][info] Logging started.[2015-04-07 22:05:42.583] [info] Version: 2.11.5.396 (built: 5509c1a4, linker: 6.0, subsystem: 4.0, checksum: 0007266f)[2015-04-07 22:05:42.584] [info] Operating System: Windows 8.1 Single Language (6.3.9600, Windows NT platform, 32-bit)[2015-04-07 22:05:42.584] [info] Memory Utilization: 58%[2015-04-07 22:05:42.584] [info] Integrity Level: High[2015-04-07 22:05:42.584] [info] Command Line: "C:\Users\Winter Light Angel\Downloads\ForsakenRO All-In-One v4.7\opensetup.exe"[2015-04-07 22:05:42.584] [Warning] Either there is no config file or it failed to open.[2015-04-07 22:05:42.904][info] Enumerated 2 DX7 drivers.[2015-04-07 22:05:42.904] [info] Driver 'Primary Display Driver': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-07 22:05:42.904] [info] HW Device 'Direct3D HAL': Type 1[2015-04-07 22:05:42.904] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-07 22:05:42.904] [info] SW Device 'RGB Emulation': Type 0[2015-04-07 22:05:42.904] [info] Driver 'Intel® HD Graphics Family': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-07 22:05:42.904] [info] HW Device 'Direct3D HAL': Type 1[2015-04-07 22:05:42.904] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-07 22:05:42.904] [info] SW Device 'RGB Emulation': Type 0[2015-04-07 22:05:43.025][info] OnChangeSettingsEngine: LUA[2015-04-07 22:06:08.199][info] LUA settings engine sanity check started.[2015-04-07 22:06:08.199] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-07 22:06:08.199] [info] Checking for 'System\OptionInfo.lub'...[2015-04-07 22:06:08.199] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-07 22:06:08.200] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-07 22:06:08.200] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-07 22:06:08.200] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-07 22:06:08.200][info] LUA settings engine sanity check stopped.[2015-04-07 22:06:08.201][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-07 22:06:09.768][info] OnChangeSettingsEngine: LUA[2015-04-07 22:06:10.626][info] LUA settings engine sanity check started.[2015-04-07 22:06:10.626] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-07 22:06:10.627] [info] Checking for 'System\OptionInfo.lub'...[2015-04-07 22:06:10.627] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-07 22:06:10.627] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-07 22:06:10.627] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-07 22:06:10.627] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-07 22:06:10.628][info] LUA settings engine sanity check stopped.[2015-04-07 22:06:10.628][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-07 22:06:12.819][info] OnChangeSettingsEngine: LUA[2015-04-07 22:06:13.640][info] LUA settings engine sanity check started.[2015-04-07 22:06:13.640] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-07 22:06:13.640] [info] Checking for 'System\OptionInfo.lub'...[2015-04-07 22:06:13.640] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-07 22:06:13.640] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-07 22:06:13.641] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-07 22:06:13.641] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-07 22:06:13.641][info] LUA settings engine sanity check stopped.[2015-04-07 22:06:13.641][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-07 22:06:25.159][info] Logging stopped.================================================================================== RO OpenSetup Log ============================================================[2015-04-07 22:11:32.878][info] Logging started.[2015-04-07 22:11:32.878] [info] Version: 2.11.5.396 (built: 5509c1a4, linker: 6.0, subsystem: 4.0, checksum: 0007266f)[2015-04-07 22:11:32.878] [info] Operating System: Windows 8.1 Single Language (6.3.9600, Windows NT platform, 32-bit)[2015-04-07 22:11:32.878] [info] Memory Utilization: 56%[2015-04-07 22:11:32.878] [info] Integrity Level: Medium[2015-04-07 22:11:32.878] [info] Command Line: "C:\Users\Winter Light Angel\Downloads\ForsakenRO All-In-One v4.7\opensetup.exe"[2015-04-07 22:11:32.878] [Warning] Either there is no config file or it failed to open.[2015-04-07 22:11:33.169][info] Enumerated 2 DX7 drivers.[2015-04-07 22:11:33.169] [info] Driver 'Primary Display Driver': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-07 22:11:33.169] [info] HW Device 'Direct3D HAL': Type 1[2015-04-07 22:11:33.169] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-07 22:11:33.169] [info] SW Device 'RGB Emulation': Type 0[2015-04-07 22:11:33.170] [info] Driver 'Intel® HD Graphics Family': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-07 22:11:33.170] [info] HW Device 'Direct3D HAL': Type 1[2015-04-07 22:11:33.170] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-07 22:11:33.170] [info] SW Device 'RGB Emulation': Type 0[2015-04-07 22:11:33.271][info] OnChangeSettingsEngine: LUA[2015-04-07 22:11:37.853][info] LUA settings engine sanity check started.[2015-04-07 22:11:37.853] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-07 22:11:37.853] [info] Checking for 'System\OptionInfo.lub'...[2015-04-07 22:11:37.853] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-07 22:11:37.853] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-07 22:11:37.854] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-07 22:11:37.854] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-07 22:11:37.854][info] LUA settings engine sanity check stopped.[2015-04-07 22:11:37.855][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-07 22:11:51.124][info] OnChangeSettingsEngine: LUA[2015-04-07 22:12:18.505][info] LUA settings engine sanity check started.[2015-04-07 22:12:18.505] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-07 22:12:18.505] [info] Checking for 'System\OptionInfo.lub'...[2015-04-07 22:12:18.505] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-07 22:12:18.506] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-07 22:12:18.506] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-07 22:12:18.506] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-07 22:12:18.506][info] LUA settings engine sanity check stopped.[2015-04-07 22:12:18.506][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-07 22:12:50.588][info] Logging stopped.================================================================================== RO OpenSetup Log ============================================================[2015-04-08 19:11:07.489][info] Logging started.[2015-04-08 19:11:07.489] [info] Version: 2.11.5.396 (built: 5509c1a4, linker: 6.0, subsystem: 4.0, checksum: 0007266f)[2015-04-08 19:11:07.489] [info] Operating System: Windows 8.1 Single Language (6.3.9600, Windows NT platform, 32-bit)[2015-04-08 19:11:07.489] [info] Memory Utilization: 58%[2015-04-08 19:11:07.489] [info] Integrity Level: High[2015-04-08 19:11:07.489] [info] Command Line: "C:\Users\Winter Light Angel\Downloads\ForsakenRO All-In-One v4.7\opensetup.exe"[2015-04-08 19:11:07.489] [Warning] Either there is no config file or it failed to open.[2015-04-08 19:11:08.131][info] Enumerated 2 DX7 drivers.[2015-04-08 19:11:08.131] [info] Driver 'Primary Display Driver': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-08 19:11:08.131] [info] HW Device 'Direct3D HAL': Type 1[2015-04-08 19:11:08.131] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-08 19:11:08.131] [info] SW Device 'RGB Emulation': Type 0[2015-04-08 19:11:08.131] [info] Driver 'Intel® HD Graphics Family': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-08 19:11:08.131] [info] HW Device 'Direct3D HAL': Type 1[2015-04-08 19:11:08.131] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-08 19:11:08.131] [info] SW Device 'RGB Emulation': Type 0[2015-04-08 19:11:08.491][info] OnChangeSettingsEngine: LUA[2015-04-08 19:11:31.189][info] LUA settings engine sanity check started.[2015-04-08 19:11:31.189] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-08 19:11:31.189] [info] Checking for 'System\OptionInfo.lub'...[2015-04-08 19:11:31.189] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-08 19:11:31.189] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-08 19:11:31.190] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-08 19:11:31.190] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-08 19:11:31.190][info] LUA settings engine sanity check stopped.[2015-04-08 19:11:31.190][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-08 19:11:33.030][info] OnChangeSettingsEngine: LUA[2015-04-08 19:11:33.807][info] LUA settings engine sanity check started.[2015-04-08 19:11:33.807] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-08 19:11:33.807] [info] Checking for 'System\OptionInfo.lub'...[2015-04-08 19:11:33.808] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-08 19:11:33.808] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-08 19:11:33.809] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-08 19:11:33.809] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-08 19:11:33.809][info] LUA settings engine sanity check stopped.[2015-04-08 19:11:33.809][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-08 19:11:36.925][info] Logging stopped.================================================================================== RO OpenSetup Log ============================================================[2015-04-08 19:16:27.267][info] Logging started.[2015-04-08 19:16:27.267] [info] Version: 2.11.5.396 (built: 5509c1a4, linker: 6.0, subsystem: 4.0, checksum: 0007266f)[2015-04-08 19:16:27.267] [info] Operating System: Windows 8.1 Single Language (6.3.9600, Windows NT platform, 32-bit)[2015-04-08 19:16:27.267] [info] Memory Utilization: 47%[2015-04-08 19:16:27.267] [info] Integrity Level: Medium[2015-04-08 19:16:27.267] [info] Command Line: "C:\Users\Winter Light Angel\Documents\Distractions\ForsakenRO All-In-One v4.7\opensetup.exe"[2015-04-08 19:16:27.267] [Warning] Either there is no config file or it failed to open.[2015-04-08 19:16:27.588][info] Enumerated 2 DX7 drivers.[2015-04-08 19:16:27.588] [info] Driver 'Primary Display Driver': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-08 19:16:27.588] [info] HW Device 'Direct3D HAL': Type 1[2015-04-08 19:16:27.588] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-08 19:16:27.588] [info] SW Device 'RGB Emulation': Type 0[2015-04-08 19:16:27.588] [info] Driver 'Intel® HD Graphics Family': 13 video modes (5 filtered), 2 hw devices, 1 sw devices[2015-04-08 19:16:27.588] [info] HW Device 'Direct3D HAL': Type 1[2015-04-08 19:16:27.588] [info] HW Device 'Direct3D T&L HAL': Type 2[2015-04-08 19:16:27.588] [info] SW Device 'RGB Emulation': Type 0[2015-04-08 19:16:27.684][info] OnChangeSettingsEngine: LUA[2015-04-08 19:16:30.059][info] LUA settings engine sanity check started.[2015-04-08 19:16:30.059] [info] Checking for 'System\LuaFiles514\OptionInfo.lub'...[2015-04-08 19:16:30.059] [info] Checking for 'System\OptionInfo.lub'...[2015-04-08 19:16:30.059] [Error] No usable default settings file was found, your client won't be able to read settings.[2015-04-08 19:16:30.060] [info] Checking for 'savedata\OptionInfo.lua'...[2015-04-08 19:16:30.060] [info] Settings file 'savedata\OptionInfo.lua' found, can be both read and written.[2015-04-08 19:16:30.060] [info] Checking for 'savedata\OptionInfo.lub'...[2015-04-08 19:16:30.060][info] LUA settings engine sanity check stopped.[2015-04-08 19:16:30.061][Error] Displaying message:Selected settings engine has determined, that your installation state will interfere with the correct loading and saving of settings.See opensetup.log for details.System Error (0x00000002, 2):The system cannot find the file specified.[2015-04-08 19:16:34.075][info] OnChangeSettingsEngine: LUA[2015-04-08 19:16:43.117][info] Logging stopped.================================================================================ If this helps, I'm also including my general laptop specs: - Windows 8.1 Single Language (2013) - Processor: Intel® Core® i5-4210U CPU @1.70 GHz 2.40 GHz - Installed Memory (RAM): 4.00 GB (3.89 Usable) - System Type: 64-bit Operating System, x64-based processor
Sensation Posted April 9, 2015 Report Posted April 9, 2015 In the lower left of the opensetup, toggle the REG instead of the LUA. Then make your changes and it'll be solved. 2
oznovx Posted April 9, 2015 Report Posted April 9, 2015 In the lower left of the opensetup, toggle the REG instead of the LUA. Then make your changes and it'll be solved. YOU ARE A SAINT. THANK YOU
Sensation Posted April 10, 2015 Report Posted April 10, 2015 YOU ARE A SAINT. THANK YOU I know, and you're welcome. It's a small thing that wasn't included in the troubleshooting guide, but a very necessary one if we're using Ai4rei's Open Setup :) 1
advark Posted June 12, 2015 Report Posted June 12, 2015 hello. im new here. i download all in one file. and still have the same problem. small windows. i already follow all the steps above but still no luck. how can i fix this?
gazdag6 Posted June 23, 2015 Report Posted June 23, 2015 (edited) Sensation's answer should be stickied right up on top. It solved the issue for lots of us :) Edited June 23, 2015 by gazdag6
